Bepaling van de deeltjesgrootte en de oppervlakte van de grondstoffen

2.50
Hdl Handle:
http://hdl.handle.net/10029/255857
Title:
Bepaling van de deeltjesgrootte en de oppervlakte van de grondstoffen
Authors:
Wilde PGM de; Beek AIM van de; Keijzer J; Aalbers TG
Other Titles:
Determination of the particle size and surface area of the raw materials
Abstract:
Abstract niet beschikbaar

The joint research project "Environmental implications of useful applications of primary and secondary materials to be used on or in the ground", was carried out by four institutes i.e. RIVM, ECN, TNO and INTRON. In this research project an estimation had been made of the environmental implications when primary materials (natural materials) are replaced by secondary materials (waste materials) in road constructions and building materials. For this estimation the standard leaching test was used. The standard leaching test is applicable to materials with particles smaller than 3 mm. Therefore, some materials have to be reduced by crushing and grinding. This report concerns the determination of the size distribution of the raw materials and materials after grinding by dry sieving and wet sieving. On the basis of the results of the test sieving an estimation of the surface area's was made. In general, it was found that the particles smaller than 20 mum contributes more than 90% to the total surface area and less than 10% to the mass weight of the materials. Grinding hardly affects the percentage of mass weight of the fractions > 20 mum and < 20 mum. A relatively small increase of the fraction < 20 mum results in a considerable increase of the total surface area. The surface area of waste incinerator slag had been measured by the BET-method too. It was found that it wasn't expedient to determine accurately the surface area of particles larger than 1 mm. Moreover, the relation between the particle size of the material and the leaching behaviour of Cd, Cr, Cu, Mo, Ni, Pb, and Zn had been investigated by the column-tests on waste incinerator slag, which had been grinded to different particle sizes. No significant relationship was found between the leaching behaviour and the particle size.
Issue Date:
31-Jul-1990
URI:
http://hdl.handle.net/10029/255857
Additional Links:
http://www.rivm.nl/bibliotheek/rapporten/738504005.html
Type:
Onderzoeksrapport
Language:
nl
Sponsors:
DGM/A NOVEM
Appears in Collections:
RIVM official reports

Full metadata record

DC FieldValue Language
dc.contributor.authorWilde PGM de-
dc.contributor.authorBeek AIM van de-
dc.contributor.authorKeijzer J-
dc.contributor.authorAalbers TG-
dc.date.accessioned2012-12-12T12:35:54Z-
dc.date.available2012-12-12T12:35:54Z-
dc.date.issued1990-07-31-
dc.identifier738504005-
dc.identifier.urihttp://hdl.handle.net/10029/255857-
dc.description.abstractAbstract niet beschikbaarnl
dc.description.abstractThe joint research project "Environmental implications of useful applications of primary and secondary materials to be used on or in the ground", was carried out by four institutes i.e. RIVM, ECN, TNO and INTRON. In this research project an estimation had been made of the environmental implications when primary materials (natural materials) are replaced by secondary materials (waste materials) in road constructions and building materials. For this estimation the standard leaching test was used. The standard leaching test is applicable to materials with particles smaller than 3 mm. Therefore, some materials have to be reduced by crushing and grinding. This report concerns the determination of the size distribution of the raw materials and materials after grinding by dry sieving and wet sieving. On the basis of the results of the test sieving an estimation of the surface area's was made. In general, it was found that the particles smaller than 20 mum contributes more than 90% to the total surface area and less than 10% to the mass weight of the materials. Grinding hardly affects the percentage of mass weight of the fractions > 20 mum and < 20 mum. A relatively small increase of the fraction < 20 mum results in a considerable increase of the total surface area. The surface area of waste incinerator slag had been measured by the BET-method too. It was found that it wasn't expedient to determine accurately the surface area of particles larger than 1 mm. Moreover, the relation between the particle size of the material and the leaching behaviour of Cd, Cr, Cu, Mo, Ni, Pb, and Zn had been investigated by the column-tests on waste incinerator slag, which had been grinded to different particle sizes. No significant relationship was found between the leaching behaviour and the particle size.en
dc.description.sponsorshipDGM/A NOVEM-
dc.format.extent154 p-
dc.language.isonl-
dc.relation.ispartofRIVM Rapport 738504005-
dc.relation.urlhttp://www.rivm.nl/bibliotheek/rapporten/738504005.html-
dc.subject17nl
dc.subjectzeeftestnl
dc.subjectuitlogennl
dc.subjectzware metalennl
dc.titleBepaling van de deeltjesgrootte en de oppervlakte van de grondstoffennl
dc.title.alternativeDetermination of the particle size and surface area of the raw materialsen
dc.typeOnderzoeksrapport-
dc.date.updated2012-12-12T12:35:55Z-
All Items in WARP are protected by copyright, with all rights reserved, unless otherwise indicated.