Verwachtingen omtrent de reductie van afvalstoffen uit de doelgroep metaal-electro in de jaren 2000 en 2010
Citations
Altmetric:
Series / Report no.
Open Access
Type
Report
Language
nl
Date
1994-12-31
Research Projects
Organizational Units
Journal Issue
Title
Verwachtingen omtrent de reductie van afvalstoffen
uit de doelgroep metaal-electro in de jaren 2000 en
2010
Translated Title
Projections for prevention and reuse of wastes
from the metal-finishing and electrochemical industry in the years 2000 and
2010
Published in
Abstract
In dit rapport worden voor de metaalbewerkings- en
elektrotechnische industrie verwachtingen gegeven voor de hoeveelheden
afvalstoffen, de mogelijkheden voor preventie, hergebruik en de
minimalisering van het storten van de resterende hoeveelheden in de jaren
2000 en 2010. Bij de verwachtingen is uitgegaan van technisch haalbare
preventie- en hergebruiksopties alsmede inmiddels geformuleerd beleid. Het
basisjaar was 1990/1991. Ten opzichte van het basisjaar wordt verwacht dat
in het jaar 2000 16% preventie kan worden bereikt. In het jaar 2010 kan de
preventie 23% bedragen. Het hergebruik in de jaren 2000 en 2010 kan
respectievelijk 60% en 57% bedragen, tegen 56% in het basisjaar. De
premisse dat preventie prevaleert over hergebruik, conform de officiele
beleidsuitgangspunten, is de oorzaak van de relatieve daling in de jaren
tussen 2000 en 2010. Het relatieve aandeel van de afvalstoffen die ter
verbranding worden afgevoerd verandert over de jaren niet en zal 12% blijven
bedragen. De hoeveelheid te storten afvalstoffen kan sterk dalen van 32% in
het basisjaar tot 12% in het prognosejaar 2000 en verder tot 7% in het
prognosejaar 2010. Met name voor het emballage-afval wordt voorzien dat het
effect van de voorgenomen stortverboden groot zal zijn. Opgemerkt wordt dat
voor een aantal kostbare opties waarmee een grote reduktie bereikt kan
worden, zal gelden dat het doorvoeren ervan en het tempo waarin dit gebeurt,
sterk zal afhangen van de specifieke bedrijfsomstandigheden. Hierbij zal de
economische levensduur van de huidige produktie-installaties in de
afwegingen niet op de laatste plaats komen.
For the metal-finishing and electrotechnical industry, projections are presented for the amount of waste, the possibilities for prevention, reuse and minimisation of landfilling of the resulting quantities. The expectations are based on proven options for reduction and current policy. The base year was 1990/1991. The quantitative prevention is expected to amount to 16% in the year 2000 and 23% in the year 2010. Reuse is projected to increase form 56% in the base year tot 60% in the year 2000 after which it drops to 57% in the year 2010. This is due to the adaption of the official policy that prevention prevails over reuse. Incineration will remain on the level of the base year: 12%. Landfilling however, will decrease from 32% in the base year to 12% in the year 2000 and even further to 7% in the year 2010. Finally, it should be noted that the implementation of some expensive options which have a significant share in the total reduction, wil depend on the specific conditions for the concerned companies. The remaining economical value of the current production capacity will show important.
For the metal-finishing and electrotechnical industry, projections are presented for the amount of waste, the possibilities for prevention, reuse and minimisation of landfilling of the resulting quantities. The expectations are based on proven options for reduction and current policy. The base year was 1990/1991. The quantitative prevention is expected to amount to 16% in the year 2000 and 23% in the year 2010. Reuse is projected to increase form 56% in the base year tot 60% in the year 2000 after which it drops to 57% in the year 2010. This is due to the adaption of the official policy that prevention prevails over reuse. Incineration will remain on the level of the base year: 12%. Landfilling however, will decrease from 32% in the base year to 12% in the year 2000 and even further to 7% in the year 2010. Finally, it should be noted that the implementation of some expensive options which have a significant share in the total reduction, wil depend on the specific conditions for the concerned companies. The remaining economical value of the current production capacity will show important.
Description
Publisher
Sponsors
DGM/A