Bepaling van een aantal kenmerken voor de nitraatbepaling in grondwater met de Nitrachek
Citations
Altmetric:
Series / Report no.
Open Access
Type
Report
Language
nl
Date
1995-04-30
Research Projects
Organizational Units
Journal Issue
Title
Bepaling van een aantal kenmerken voor de
nitraatbepaling in grondwater met de Nitrachek
Translated Title
Determination of a few characteristics for the
determination of nitrate in groundwater with the
Nitrachek
Published in
Abstract
Met de Nitrachek wordt het nitraatgehalte on-site in
grondwater bepaald. In het kader van het deelproject Veldmetingen/GLP
(712602) zijn experimenten uitgevoerd om de vergelijkbaarheid tussen
veldmetingen met de Nitrachek, en spectrofotometrische-laboratoriummetingen
vast te stellen. Uit het onderzoek blijkt het gemiddelde van 12
Nitrachek-metingen in het veld, niet significant te verschillen van de
spectrofotometrische laboratoriumbepaling van het mengmonster. Daarnaast
zijn voor de nitraatmeting met de Nitrachek een aantal kenmerken bepaald.
De verschillende kenmerken zijn o.a. meetbereik (5 tot 440 mg.l-1),
herhaalbaarheid (16 mg.l-1) en binnen-laboratorium-reproduceerbaarheid (74
mg.l-1). Voor de Nitrachek metingen zijn verschillende meetmethoden met
elkaar vergeleken. Zoals de dip-methode waarbij het teststrookje in de te
meten oplossing wordt gestoken en de druppel-methode waarbij een vast volume
(standaard, 10 mul) op het teststrookje wordt gebracht. De meting heeft een
grotere nauwkeurigheid wanneer een vast volume monster in contact wordt
gebracht met het teststrookje. De meetmethode is toepasbaar voor on-site
metingen, waarbij een maximale meetfout van 10% wordt geaccepteerd. Voor de
dip-methode en de druppel-methode (10 mul) moeten vier metingen worden
verricht. Bij de druppel-methode waarbij 8 mul monster op het teststrookje
wordt gepipetteerd, kan worden volstaan met drie metingen. De metingen
moeten worden gecorrigeerd naar een temperatuur. De nitraatbepaling met de
Nitrachek wordt gestoord door nitriet. Het constateren van de aanwezigheid
van nitriet levert belangrijke informatie over de betrouwbaarheid van de
nitraat-meting.
It is possible to make rapid field measurements of nitrate using the Nitrachek. Within the context of subproject Field measurements/Quality Assurance (712602), measurements have been carried out to establish the comparability of the Nitrachek field measurements with spectrofotometric laboratory measurements. The Nitrachek field measurements have shown good agreement with spectrofotometric laboratory measurements. A number of characteristics have also been determined for the nitrate measurement using Nitrachek. The various characteristics include extend of measurement (5 - 440 mg.l-1), repeatability (16 mg.l-1) and within-laboratory-reproducibility (74 mg.l-1). Different measurement methods for Nitrachek measurements are tested for comparability. The dip method is a method in which the test strip is dipped into the solution and measured, while the drop method a drop (standard, 10 mul) of the solution is applied to the test strip and measured. The accuracy of the drop method is better than that of the dip method. For a maximum error of 10% by a confidence interval of 95%, four measurements for each method are necessary to assure this quality. For a drop method with a sample amount of 8 mul there should be three measurements. The Nitrachek measurement is interfered with by nitrite. The determination of the presence of nitrite gives some important information on the reliability of the nitrate measurement.
It is possible to make rapid field measurements of nitrate using the Nitrachek. Within the context of subproject Field measurements/Quality Assurance (712602), measurements have been carried out to establish the comparability of the Nitrachek field measurements with spectrofotometric laboratory measurements. The Nitrachek field measurements have shown good agreement with spectrofotometric laboratory measurements. A number of characteristics have also been determined for the nitrate measurement using Nitrachek. The various characteristics include extend of measurement (5 - 440 mg.l-1), repeatability (16 mg.l-1) and within-laboratory-reproducibility (74 mg.l-1). Different measurement methods for Nitrachek measurements are tested for comparability. The dip method is a method in which the test strip is dipped into the solution and measured, while the drop method a drop (standard, 10 mul) of the solution is applied to the test strip and measured. The accuracy of the drop method is better than that of the dip method. For a maximum error of 10% by a confidence interval of 95%, four measurements for each method are necessary to assure this quality. For a drop method with a sample amount of 8 mul there should be three measurements. The Nitrachek measurement is interfered with by nitrite. The determination of the presence of nitrite gives some important information on the reliability of the nitrate measurement.
Description
Publisher
Sponsors
RIVM